產(chǎn)品英文名稱：Mouse IFN-γ(AN-18)ELISPOT Set
產(chǎn)品中文名稱：小鼠干擾素-γ (AN-18) ELISPOT set

Mouse IFN-γ (AN-18) ELISPOT Set 推薦使用步驟
1. Coat microwells with 100 μL per well of Capture Antibody diluted in Coating Buffer. For recommended antibody coating dilution, see lot-specific Instruction/Analysis Certificate. Seal plate and incubate overnight at 4°C.
2. Aspirate wells and wash 5 times with ≥ 300 μL/well Wash Buffer. After last wash, invert plate and blot on absorbent paper to remove any residual buffer.
3. Block plates with ≥ 200 μL/well Assay Diluent. Incubate at RT for 1 hour.
4. Aspirate/wash as in step 2.
5. Prepare standard and sample dilutions in Assay Diluent. See “Standards Preparation and Handling”.
6. Pipette 100 μL of each standard, sample, and control into appropriate wells.Seal plate and incubate for 2 hours at RT.
7. Aspirate/ wash as in step 2.
8. Add 100 μL of Working Detector (Detection Antibody + Streptavidin-HRP reagent) to each well. Seal plate and incubate for 1 hour at RT.
9. Aspirate/ wash as in step 2, but with 7 total washes. NOTE: In this final wash step, soak wells in wash buffer for 30 seconds to 1 minute for each wash.
10. Add 100 μL of Substrate Solution to each well. Incubate plate (without plate sealer) for 30 minutes at room temperature in the dark.
11. Add 50 μL of Stop Solution to each well.
12. Read absorbance at 450 nm within 30 minutes of stopping reaction. If wavelength correction is available, subtract absorbance at 570 nm fromabsorbance 450 nm.

小鼠干擾素-γ ELISPOT (AN-18) set 保存方法
1. Store unopened reagents at 2-8°C. Do not use reagents after expiration date, or if turbidity is evident.
2. Before use, bring all reagents to room temperature (18-25°C). Immediately after use, return to proper storage conditions.
3. Lyophilized standards are stable until expiration date. See below for reconstituted standard storage information.

小鼠干擾素-γ (AN-18) ELISPOT set 的優(yōu)越性
•高靈敏度
•高通量，高含量的分析
•最小體積的生物材料的要求
•適用于冷凍/解凍的生物樣品 •與其他檢驗方法兼容。例如，細胞分析。BD™ ELISPOT可以轉(zhuǎn)移克隆，增殖實驗，流式細胞術或其他分析方法。

小鼠干擾素-γ ELISPOT (AN-18) set 使用注意事項
1. Reagents which contain preservatives may be toxic if ingested, inhaled, or in contact with skin.
2. Handle all serum and plasma specimens in accordance with NCCLS guidelines for preventing transmission of blood-borne infections.
3. Capture Antibody contains < 0.1% sodium azide. Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before discarding to avoid accumulation of potentially explosive deposits in plumbing.
4. Detection Antibody contains BSA and ProClin.-150 as a preservative.
5. Enzyme Reagent contains BSA and ProClin.-150 as a preservative.
6. Source of all serum proteins is from USDA inspected abattoirs located in the United States.